Table of Contents
Advertisement
2. Connect the camera cable to the connector on the display assembly.
3. Install the:
a.
display bezel
b.
display assembly
c.
WLAN card
d.
base cover
4. Follow the procedure in
Display panel
Removing display panel
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
WLAN card
c.
display assembly
d.
display bezel
3. To remove the display panel:
a. Remove the four M2.0 x 2 screws that secure the display panel to the display assembly [1] and lift to turn over the
display panel to access the eDP cable [2].
b. Remove the adhesive tape [1].
c. Lift the latch and disconnect the display cable from the connector on the display panel [2].
d. Lift the display panel [3].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
35
Advertisement
Table of Contents
