Installing display assembly
1. Align and place the display assembly on the system.
2. Place the hinge bracket on the system and replace the screws to secure the display assembly to the system.
3. Connect the eDP cable to the connector in the system board.
4. Install the:
a.
WLAN card
b.
base cover
5. Follow the procedure in
Display bezel
Removing display bezel
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
WLAN card
c.
display assembly
3. To remove the display bezel:
a. Using a plastic scribe, pry the outer edges to release the display bezel from the display assembly [1, 2].
32
Removing and installing components
After working inside your
Before working inside your
computer.
computer.