4. Install the
base
cover.
5. Follow the procedure in
Heat sink
Removing the heat sink
1. Follow the procedure in
2. Remove the: .
a.
base cover
b.
system fan
3. To remove the heat sink:
a. In sequential order (as indicated on the heat-sink), loosen the seven M2.0 x 3 screws that secure the heat sink to the
system board [1].
b. Lift the heat sink away from the system [2].
Installing the heat sink
1. Place the heat sink to its slot in the system.
2. Tighten the seven M2.0 x 3 screws to secure the heat sink to the system board.
3. Install the:
a.
system fan
b.
base cover
4. Follow the procedure in
22
Removing and installing components
After working inside your
Before working inside your
After working inside your
computer.
computer.
computer.