Installing the hard drive
1. Insert the hard drive into the slot on the system.
2. Replace the four M2.0 x 3 screws to secure the hard drive assembly to the system.
3. Affix the hard drive cable on the battery.
4. Connect the hard drive cable to the connector on the system board.
5. Install the:
a.
battery
b.
base cover
6. Follow the procedure in
Coin-cell battery
Removing the coin cell battery
1. Follow the procedure in
2. Remove the
base
cover.
3. To remove the coin cell battery:
a. Disconnect the coin cell battery cable from the connector on the system board [1].
b. Pry the coin cell battery to release from the adhesive and lift it away from the system board [2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
15