Installing The Coin Cell Battery; Solid State Drive; Removing The M.2 Solid-State Drive - Ssd - Dell Vostro 5471 Owner's Manual

Installing the coin cell battery

1. Place the coin cell battery into the slot on the system board.
2. Connect the coin cell battery cable to the connector on the system board.
3. Install the base cover.
4. Follow the procedure in

Solid State Drive

Removing the M.2 Solid-State Drive — SSD
1. Follow the procedure in
2. Remove the base cover.
3. To remove the solid-state drive (SSD):
a. Remove the M2.0 x 3 screw that secure the SSD to the system [1].
b. Lift and slide the SSD away from the system [2].
16 Removing and installing components
After working inside your
Before working inside your
computer.
computer.