Integra DRX-4.3 Instruction Manual page 179

Setting Item Default Value Setting Details
BLUETOOTH Main/Zone 2/ Set the 12V trigger output setting to each input.
Zone 3 "Off": No output
"Main": Output when "BLUETOOTH" is selected as
input for main room.
"Zone 2": Output when "BLUETOOTH" is selected
as input for ZONE2.
"Main/Zone 2": Output when "BLUETOOTH" is
selected as input for main room or ZONE2.
"Zone 3": Output when "BLUETOOTH" is selected
as input for ZONE3.
"Main/Zone 3": Output when "BLUETOOTH" is
selected as input for main room or ZONE3.
"Zone 2/Zone 3": Output when "BLUETOOTH" is
selected as input for ZONE2 or ZONE3.
"Main/Zone 2/Zone 3": Output when
"BLUETOOTH" is selected as input for main room,
ZONE2 or ZONE3.
Contents Connections
≫
„ 8. Works with SONOS
Change the settings to connect with the Sonos Connect.
Setting Item Default Value
Input Selector Off
Connected Device -
179
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Select the input selector to which the Sonos
Connect is connected.
• Selecting "Off" disables the interlock function
with Sonos.
Displays the Sonos Connect connected to the
same network as the network of this unit. Press
the Enter button to select the connected Sonos
Connect.
• Products (e.g. Play:3 unequipped with an output
terminal) other than the Sonos Connect are also
displayed in the device list and selectable. In that
case, when playback on the Sonos side starts,
the input is switched, however, audio is not
output. Select the room name of the connected
Sonos Connect.
• Up to 32 devices can be displayed on the Sonos
product list screen. If you cannot find the Sonos
Connect to be interlocked, return to the previous
screen, turn off the product you want to interlock,
and try again.
• To use this function, set "Input Selector"
beforehand.
≫