Integra DRX-4.3 Instruction Manual page 159

3. Audio Adjust
„ 1. Multiplex/Mono
Change the settings of multiplex audio playback.
Setting Item Default Value
Multiplex Input Main
Channel
Mono Input Left + Right
Channel
Mono Output Center
Speaker
Setting Details
Set the audio channel or language to be output
when playing multiplex audio or multilingual
broadcasts, etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels are output at
the same time.
• For multiplex audio broadcasts, pressing the
button on the remote controller will display "1+1"
on the main unit's display.
Set the input channel when playing in Mono
listening mode digital signals such as Dolby Digital
or analog/PCM signals recorded in 2 channels.
"Left": Left channel only
"Right": Right channel only
"Left + Right": Left and right channels
Set the speaker to output monaural audio in the
Mono listening mode.
"Center": Audio is output from the center speaker.
"Left/Right": Audio is output from the front L/R
speakers.
• If the item cannot be selected even though
connection is correct, check if the setting in
"2. Speaker" - "Configuration" - "Speaker
Channels" matches the number of connected
channels.
Contents Connections
≫
„ 2. Dolby
Change the setting of when Dolby signals are input.
Setting Item Default Value
Loudness On
Management
Center Spread* Off
* This function will not be selectable if the firmware is updated after purchase or the
firmware is switched in the product production process. For details of firmware update,
see "Additional Function (Firmware Update)" (
159
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
When playing Dolby TrueHD, enable the dialog
normalization function which keeps the volume of
dialog at a certain level. Note that when this setting
is Off, the Late Night function that allows you to
enjoy surround at low volumes is fixed to off when
playing Dolby Digital Plus/Dolby TrueHD.
"On": When this function is used
"Off": When this function is not used
Adjust the width of the sound field of the front
channel when playing in Dolby Audio - Surr
listening mode.
"On": The sound field is spread to left and right.
"Off": The sound field is centralized.
• Depending on the speaker settings, "Off" is
applied.
p6).
≫