is connected to this unit with an HDMI cable, digital coaxial cable or digital
optical cable, change the audio output of the AV component to the PCM
output.
• When video and audio via HDMI input are output to ZONE 2, set "1. Input/
Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" (
Setup menu.
• DSD audio signals cannot be output to ZONE 2 with the "NET" input selector.
• If ZONE 2 is on, power consumption during standby will increase.
To disable the function:
While pressing and holding the Zone 2 Shift button on
the remote controller, press . Alternatively, press the Off button on the main unit.
Contents
p148) to "Use" on the
❏ Playing Back (ZONE 3) (
110
Connections
≫
≫
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
p111)
≫