Integra DRX-4.3 Instruction Manual page 112

playback mode to playback in the separate room only.
• For ZONE 3 output, audio from externally connected AV components can be
output only when it is an analog audio signal.
• DSD audio signals cannot be output to ZONE 3 with the "NET" input selector.
• If ZONE 3 is on, power consumption during standby will increase.
To disable the function: While pressing and holding the Zone 3 Shift button on
the remote controller, press . Alternatively, press the Off button on the main unit.
Contents Connections
≫
112
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫