Integra DRX-4.3 Instruction Manual page 155

Hide thumbs Also See for DRX-4.3:
Table of Contents

Advertisement

Setting Item
Default Value
Double Bass
On
„ 3. Distance
Set the distance from each speaker to the listening position.
Setting Item
Default Value
Front Left
12.0 ft/3.60 m
Center
12.0 ft/3.60 m
Front Right
12.0 ft/3.60 m
Height 1 Left
9.0 ft/2.70 m
Height 1 Right
9.0 ft/2.70 m
Height 2 Left
9.0 ft/2.70 m
Height 2 Right
9.0 ft/2.70 m
Setting Details
This can be selected only when "Configuration"
- "Subwoofer" is set to "Yes" and "Front" is set to
"Full Band".
Bass output is boosted by feeding bass sounds
from the front right and left, and center speakers to
the subwoofer.
"On": Bass output is boosted.
"Off": Bass output is not boosted.
• This function is not automatically set even if
AccuEQ Room Calibration is performed.
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Contents
Connections
Setting Item
Default Value
Surround Right
7.0 ft/2.10 m
Surr Back Right
7.0 ft/2.10 m
Surr Back Left
7.0 ft/2.10 m
Surround Left
7.0 ft/2.10 m
Subwoofer
12.0 ft/3.60 m
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the Mode button on the remote
controller. When using the unit "feet", the setting is available in increments of 0.1 ft from
0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of
0.03 m from 0.03 m to 9.00 m.
155
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.

Advertisement

Table of Contents
loading

Table of Contents