Unpackaging The Charging Station - Siemens SICHARGE UC Operating Instructions Manual

4.1.3

Unpackaging the charging station

Depending on the transport route, the carrier supplies the SICHARGE UC Dispenser in
different transport packaging.
Specifications for the disposal of the packaging material can be found in the section Disposal
(Page 107).
Removing packaging for road transport
To remove the packaging, proceed as follows:
1. Remove the transport film.
2. Remove the edge protection strips.
3. Remove the spacers.
Remove packaging for air transport
To remove the packaging, proceed as follows:
1. Remove the screws from the side panel of the packaging.
2. Take off the side panel.
3. Lift off the cover of the transport packaging of the SICHARGE UC Dispenser.
Remove the packaging for sea transport
To remove the packaging, proceed as follows:
1. Remove the aluminum compound foil.
2. Remove the screws from the side panel of the packaging.
3. Take off the side panel.
4. Lift off the cover of the transport packaging of the SICHARGE UC Dispenser.
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE
Application planning
4.1 Checking incoming goods
31