Siemens SICHARGE UC Operating Instructions Manual page 100

Handling alarms and errors
9.5 Alarm messages in the alarm history
Alarm code Description
18 Vehicle error: Battery temperature pre­
vents charging
19 Vehicle error: The electric vehicle changes
its position.
20 Vehicle error: Failure of the charging plug
interlock
21 Vehicle error: Battery malfunction
22 Vehicle error: Charging current difference The vehicle has detected that the charging station cannot provide
23 Vehicle error: The charging voltage is out­
side the permissible range.
24 Vehicle error: Incompatibility of the char­
ging system
25 ... 43 Power converter error
100
Error handling
The vehicle battery is too hot or too cold for charging.
• Bring the vehicle to a standstill
The vehicle has not recognized the charging plug inserted into the
charging socket or the charging plug cannot be disconnected.
Any unrecoverable fault or unrecoverable fault state of the vehicle
battery
an output current that meets the actual voltage requirement.
Therefore, the vehicle has stopped the communication session.
The vehicle has detected that the vehicle battery voltage is below
or above the normal voltage range.
The vehicle has determined that the charging station is incompat­
ible.
• Insert the charging plug into the plug holder
• Start the charging station in manual mode
• If the error does not appear, try a new charging process.
Operating Instructions, 06/2023, A5E50235695-AE
SICHARGE UC Dispenser