Floor Mounting; Mounting The Dispenser On The Floor - Siemens SICHARGE UC Operating Instructions Manual

Installation

5.2 Floor mounting

5.2 Floor mounting
5.2.1

Mounting the Dispenser on the floor

Due to the variety of options, the total weight of the SICHARGE UC Dispenser is different,
depending on the equipment.
To mount the SICHARGE UC Dispenser at the location, you must lift the
SICHARGE UC Dispenser off the transport pallet. If the SICHARGE UC Dispenser is heavy,
transport it to the prepared mounting area using a forklift.
Lifting the SICHARGE UC Dispenser
To lift the SICHARGE UC Dispenser off the transport pallet, follow these steps:
1. Connect the transport lugs of the SICHARGE UC Dispenser and the lifting equipment. Only
use suitable and approved lifting equipment.
2. Lift the SICHARGE UC Dispenser vertically from the transport pallet.
3. Transport the SICHARGE UC Dispenser suspended to the location.
Required tools and fasteners
To mount the SICHARGE UC Dispenser, you need the following tools:
• Torque wrench
• Socket: Hexagonal
The mounting material is not included in the scope of delivery.
We recommend the following fixing material for mounting the SICHARGE UC Dispenser to the
base area:
• 6 bolt anchors M12
For example, FISCHER FAZ ΙΙ 12/20 H A4 cap nut
• 6 washers M12
• 6 nuts M12
50
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE