Siemens SICHARGE UC Operating Instructions Manual page 71

Plug in the charging cable
Proceed as follows to plug in the charging cable:
1. Take the charging plug from the holder of the SICHARGE UC Dispenser.
2. If you need more cable length, remove the cable from the cable holder.
3. Insert the charging plug into the vehicle's charging socket.
The electric vehicle automatically locks the plug-in connection between the charging cable
and the electric vehicle.
Automatic start of the charging process
Once the plug connection is locked, the charging process starts automatically. The Start
menu is displayed on the SICHARGE UC Dispenser touch screen. Symbols in the status bar
indicate the current vehicle status and connection status.
①
②
Figure 8-1 Status bar
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE
"Vehicle is charging" symbol
"Connection locked" symbol
Operation
8.2 Plug in the charging cable
71