Uxa4410 Input Section - EAW QX Series Application Manual

Passive Point Source
Application Guide

UXA4410 Input Section

1. EQ/Filter Graphic Window: Click and drag functionality to control Low Shelf Filters, (5) PEQ
Filters, and an FIR Hi Shelf Filter. Clicking the right facing arrow at the top corner expands and
hides the detail pane.
2. EQ/Filters Section: Manually adjust settings for all Filters. Use << >> buttons to navigate
from one band to the next. There is an additional pull-down menu to choose type of filter, with
an option to disable the FIR High Shelf to reduce latency (this filter is disabled by default).
3. Signal Routing: Assign input sources to input channels, or combine input sources to a single
input channel. Select an input source type between Analog, AES3, and Dante (See both pull-
down menus below).
| 23
Tel 800 992 5013 / +1 508 234 6158 www.eaw.com