Using The Loudspeaker; Sound System Design; Using Eaw Resolution - EAW QX Series Application Manual

Passive Point Source

Using the Loudspeaker

Users will need to perform the following
general tasks to properly put a EAW passive
point source product into use. This manual
includes details for each task.
1. Design the system using the Resolution™ 2
Design & Control Software
Help File for further information about using
Resolution).
2. Design and install suspension points to
support the product(s)/rigging in intended
locations and aimed in the desired directions.
If ground-stacked, provide a level surface
capable of supporting the total weight of the
loudspeaker(s).
3. Connect the loudspeakers to a supported
EAW Processor and/or power amp.
4. Set-up and adjust overall system gain and
signal processing, as needed to maximize the
array's performance for the application.
5. Provide training to operate the
loudspeakers within their limits.
6. Provide regular inspection and
maintenance to maintain the integrity of
the installation and the performance of the
loudspeakers.

Sound System Design

See Resolution Help File
properly designing line array systems.
Software
EAW Resolution 2 software is designed to
assist in SPL predictions, determine splay
angles, and calculate rigging limits for all line
array items.
Always ensure that your EAW Resolution
software is up-to-date.
Application Guide
(see the program
for assistance in
Tel 800 992 5013 / +1 508 234 6158
For a complete list of recommended system
requirements, please refer to the
2 help file.

Using EAW Resolution™

EAW Resolution is the key to determining
the optimal loudspeaker configuration for
any application. Rooted in EAW's proprietary
FChart modeling and calculation engine,
Resolution allows users to easily model any
venue and visualize a wide variety of sound
system designs to determine what particular
configuration is best suited to the venue.
Users simply need to define the loudspeaker
position, allowable trim, minimum clearance,
and quantity available and use the Assistant
to determine the optimal loudspeaker
configuration for a given venue. In many
situations no further prediction work will be
necessary for optimal results. Users can also
adjust the results after running the Assistant
by manually adding/removing modules or
adjusting coverage and observing changes in
predicted results.
Please visit www.eaw.com
latest version of Resolution. Instructional
videos can be viewed on education.eaw.com.
|
www.eaw.com
Resolution
to download the
3