Loading Greyboxes (Eaw Speaker Preset Files) Into Uxa4410 - EAW QX Series Application Manual

Passive Point Source
Application Guide
3. Greybox: Load EAW Greyboxes and set Input source (See pull down menu below).
4. Output Section: Adjust gain, invert polarity, and set delay or delay distance. Unity Gain and
Invert Polarity is disabled once a Greybox is loaded.
5. Limiter: Set Voltage Threshold, as well as Attack and Release times.
6. Amp: Bridge amplifier output channels and select the load type in either voltage or ohms (an
auto option is also available).
7. Input Channels: Signal meters and channel labels. To change a channel label, double click on
the default letter/number and type in a friendly name.
8. Output Channels: Signal meters and channel labels. To change a channel label, double click
on the default letter/number and type in a friendly name.
9. Input/Output Color Indicators: An easy method to distinguish which outputs are utilizing
which input source (Assigned output channels will match the color of input channels).

Loading Greyboxes (EAW Speaker Preset Files) into UXA4410

To load a Greybox onto one of the UXA devices, click the Edit button to open the edit window.
| 25
Tel 800 992 5013 / +1 508 234 6158 www.eaw.com