EAW QX Series Application Manual page 71

Passive Point Source
5. Review the MKC Series or MKD526 Loudspeaker installation
a. Confirm the loudspeaker is level or plumb depending on the configuration.
b. Confirm the aim angle is as expected.
c. Confirm all hardware is tight.
6. Maintenance of an MKC Series Metal Pan & Tilt Bracket installation
a. WARNING: Not following Maintenance instructions could result in equipment
damage, serious injury or death.
b. Maintenance should only be performed by an experienced technician.
c. As with any professional loudspeaker system, routine maintenance must be conducted in
order to ensure the longevity and safe, consistent performance.
d. Inspect the MKC Series Metal Pan & Tilt Bracket for damage. Brackets with visible
damage should be replaced and discarded.
e. Inspect hardware securing the u-bracket to the mounting surface for corrosion or
looseness. Tighten loose hardware and consider installing hardware locking methods.
Replace and discard corroded hardware.
f. Inspect hardware mounting the MKC Series loudspeaker to the brackets for corrosion or
looseness. Tighten loose hardware. Replace and discard corroded hardware.
g. Clean the MKC Series Metal Pan and Tilt Brackets and MKC Series or MKD526
Loudspeaker with a dry cloth.
Application Guide
Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
71