Powerboost Function; Activation; Deactivating; Shortboost Function - Siemens EX6 JY Series Instruction Manual

PowerBoost function

en
vPowerBoost function
T he PowerBoost function enables you to heat up large
P o w e r B o o s t f u n c t i o n
quantities of water faster than when using heat setting
9.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration).
The PowerBoost function can also be activated in
Note:
the flexible area if the cooking zone is being used as a
single hotplate.

Activation

Select a hotplate.
1.
Set boost in the settings area. The
2.
Ý symbols will be lit.
Select the symbol.
ï
3.
This function has now been activated.

Deactivating

Select the hotplate and set a different heat setting in the
settings area.
This function has now been deactivated.
In certain circumstances, the PowerBoost
Note:
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
20
and
ï
xShortBoost function
T he ShortBoost function enables you to heat cookware
S h o r t B o o s t f u n c t i o n
faster than when using heat setting 9.
After deactivating the function, select the appropriate
heat setting for your food.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration).
With the flexible cooking zone, the ShortBoost
Note:
function can be activated even if it is used as the only
cooking zone.

Recommendations for use

Always use cookware that has not been pre-heated.
■
Use pots and pans with a flat base. Do not use
■
cookware with a thin base.
Never leave empty cookware, oil, butter or lard to
■
heat up unattended.
Do not place a lid on the cookware.
■
Place the cookware on the centre of the hotplate.
■
Ensure that the diameter of the base of the
cookware corresponds to the size of the hotplate.
You can find information on the type, size and
■
positioning of the cookware in section ~ "Induction
cooking"
Activation
Select a hotplate.
1.
Set boost in the settings area. The
2.
Ý symbols will be lit.
and
ï