Transferring Settings; Activation - Siemens EX6 JY Series Instruction Manual

Transferring settings

en
sTransferring settings
T his function can be used to transfer the heat setting,
T r a n s f e r r i n g s e t t i n g s
the programmed cooking time and the selected
cooking function from one hotplate to another.
To transfer the settings, move the cookware from the
hotplate which is switched on to another hotplate.
You can find additional information on the
Note:
positioning of the cookware in the section on ~ "Flex
Zone"

Activation

Move the cookware from the active cooking zone to
1.
a different one.
The cookware is detected. After a short delay, the
display will give you the option to adopt the present
settings for the new cooking zone.
Confirm settings.
2.
The settings are transferred to the new cooking zone.
The initial cooking zone is deactivated.
Notes
When you next place the cookware in this position,
■
the same settings will be used.
Move the cookware only to a cooking zone that is
■
not switched on, that you have not yet preset or on
which no other cookware has been placed
previously.
The PowerBoost or ShortBoost function can only be
■
moved from left to right or right to left if no cooking
zone is active.
If you move more than one item of cookware, the
■
function will only be ready to use for the item of
cookware that was last moved.
22