Table of Contents
Advertisement
FlexPlus Zone
en
}FlexPlus Zone
T he hob has a FlexPlus cooking zone which is located
F l e x P l u s Z o n e
between the two flexible cooking zones and which
switches on in conjunction with the right- or left-hand
flexible cooking zone. This means that larger cooking
vessels can be used and better cooking results can be
achieved.
The FlexPlus cooking zone always switches on in
conjunction with one of the two flexible cooking zones.
It is not possible to activate these cooking zones
independently.
Notes regarding cookware
The cookware should be positioned centrally for good
thermal detection and distribution.
The cookware should cover the side hotplate and the
FlexPlus cooking zone.
Depending on the size of the cookware, the flexible
cooking zone can be activated as two independent
hotplates or as one hotplate:
Set down the cookware
18
Oblong cookware
Activate the flexible cooking zone as
two independent hotplates or as one
hotplate.
Large round cookware
Activate the flexible cooking zone as a
single hotplate.
The vessel must not cover the two
side cooking zones and the FlexPlus
cooking zone at the same time.
Activation
Set down the cookware on the hotplate and make
1.
sure that it also covers the FlexPlus cooking zone.
Select the cooking zone and the required heat
2.
setting. The FlexPlus display lights up.
1.
The flexible cooking zone is activated.
If the two cooking zones next to the FlexPlus
Note:
cooking zone are covered by cookware, the FlexPlus
cooking zone indicator may flash.
To link the FlexPlus cooking zone to the corresponding
cooking zone, lift the cookware and set it back down on
the cooking zone before selecting a heat setting.
Deactivating
Remove the cookware from the hotplate. The displays
go out.
This deactivates the FlexPlus cooking zone.
2.
Advertisement
Table of Contents
