Wipe Protection; Activation; Deactivating; Automatic Safety Cut-Out - Siemens EX6 JY Series Instruction Manual

Wipe protection

en
kWipe protection
W iping over the control panel while the hob is switched
W i p e p r o t e c t i o n
on may alter the settings. To avoid doing this, you can
use the hob's "Lock control panel for cleaning" function.

Activation

Open the docking menu and touch the
An audible signal will sound. The control panel will
remain locked for 30 seconds.
You will now be able to clean the surface of the control
panel without altering the settings.

Deactivating

After 30 seconds, an audible signal will sound and the
control panel will be unlocked.To deactivate the
function early, follow the instructions on the display
panel.
The cleaning lock does not lock the main
Note:
switch.The hob can be switched off at any time.
36
bAutomatic safety cut-out
I f a cooking zone operates for an extended period and
A u t o m a t i c s a f e t y c u t - o u t
no settings are changed, the automatic safety switch-off
is activated.
This stops the cooking zone from heating up. A
notification will appear on the display.
Touching any symbol will switch off the display. The
symbol.
Ñ
cooking zone can now be reset.
The point at which the automatic safety switch-off
becomes active depends on the power setting in use
(after 1 to 10 hours).