Siemens EX6 JY Series Instruction Manual page 42

Home Connect
en
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note:
In networked standby mode, your appliance requires a
maximum of 2 W.
Touch the ® symbol in the docking menu to open
1.
the basic settings.
Touch the "Home Connect" setting.
2.
Touch "Wi-Fi".
3.
Touch "Switched off".
4.
This deactivates Wi-Fi; the
control panel.
Disconnecting from the network
D i s c o n n e c t i n g f r o m t h e n e t w o r k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
Touch the symbol in the docking menu to open
®
1.
the basic settings.
Touch the "Home Connect" setting.
2.
Touch "Disconnect".
3.
Touch "Next" to confirm.
4.
This disconnects the appliance from your home
network; the symbol will go out on the control panel.
D
Note:
The network connection will also be deleted if you
restore the factory settings on your appliance.
42
symbol will go out on the
D
Connecting to the network
C o n n e c t i n g t o t h e n e t w o r k
Touch the ® symbol in the docking menu to open
1.
the basic settings.
Touch the "Home Connect" setting.
2.
Touch "Use wizard to configure settings" to launch
3.
the Home Connect assistant.
Follow the instructions as per ~ "Automatic
4.
registration in the home network" or ~ "Manual
registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
If your extractor hood is directly connected, first
■
disconnect the hob from your home network and
then initiate the connection process
again.~ "Disconnecting from the network"
on page 42~ "Connecting to the network"
on page 42
Touch the symbol in the docking menu to open
®
1.
the basic settings.
Touch the "Home Connect" setting.
2.
Touch "Connect to app".
3.
You can also connect a second Home Connect account
to the hob. To do this, touch "Connect to app".
Follow the instructions in the app to complete the
4.
connection process.
Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
cooking zones to the hob.
Notes
Before you can change the basic settings, the hob
■
must be switched off.
If the appliance is being operated by means of the
■
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
When the appliance is delivered, the settings
■
transmission option is already activated by default.
If the settings transmission option has been
■
deactivated, only the hob's operating statuses will be
displayed in the Home Connect app.