Table of Contents
Advertisement
Hood connection
en
Hood control settings
Y ou can adapt the hood controls on the hob to suit
H o o d c o n t r o l s e t t i n g s
your needs at any time.
The settings will only be displayed if the
Note: .
appliance is connected to an extractor hood.
Setting
Fan control (automatic start)
Fan run-on
Automatic light activation
Automatic light deactivation
Disconnect
* Default setting when delivered
46
Description and options
If you wish, you can set the fan to start up after the hob is switched on, and you can configure the set-
tings depending on how you want the fan to run.
Off – The hood will need to be switched on manually if needed.
■
Switch on in automatic mode* – In automatic mode, the hood switches on when you switch on
■
any of the cooking zones.
Switch on in standard mode – The hood is switched on at a fixed setting when you switch on any
■
of the cooking zones.
The fan run-on eliminates residual odours; the fan automatically switches off once this is complete.
Fan off.
■
Switch on in automatic mode.*
■
Switch on with standard fan run-on.
■
The fan settings cannot be adjusted when the hob is switched off.
■
If you wish, you can set the hood light to automatically come on when the hob is switched on.
Off
■
On* – The light switches on when you switch on the hob.
■
If you wish, you can set the hood light to automatically go out when the hob is switched off.
Off*
■
On – The light switches off when you switch off the hob.
■
You can reset the connections you have saved for your home network and extractor hood at any time.
Advertisement
Table of Contents
