About System Settings - Aiphone JKW-IP Operation Manual

INTRODUCTION

1-3 About System Settings

MEMO
M
Be sure to check the system configuration before making settings, and then connect the units correctly.
•
You need to contact your provider (ISP) to connect to the Internet.
•
Before making settings, be sure to obtain necessary information such as the Static IP Address, Email
•
Addresses, and any other necessary information.
The factory default IP address setting of this device is 192.168.0.30. If the same address is already being used
*
for another device, please change the IP address for the other device.
Perform
STEP 1
The product cannot be used unless the settings have been configured.
Site A
IP Video Intercom
STEP 1
Person setting up
network
Provisional registration of the IP Video Intercom
STEP 1
Adaptor by the person setting up the network
1
Starting up the IP Video Intercom Adaptor
Turn on the power of the IP Video Intercom Adaptor
and the connected devices.
1-4 Starting up the IP Video Intercom Adaptor
2
Installing the PC Application
Install the PC Application onto the PC of the person
setting up the network.
1-5 Installing the PC Application
3
Network settings on the PC of the
person setting up the network
Set the IP address on the PC of the person setting up
the network.
2-1 PC Network Settings
through
STEP 3
Adaptor
LAN Broadband
Switch router
LA N
NG TH
P LE
ST RI
11 mm
1.2
0.6 5∼
Connected directly
or via a hub.
P.17
Network setup PC
P.12
P.12
P.16
below in order to configure the product settings.
Site B
Broadband LAN
router Switch
LAN / WAN
INTER-NET
Settings Information Memo
Example of Registration
4
Connecting the PC of the person setting up the
network and the IP Video Intercom Adaptor
Connect the IP Video Intercom Adaptor and the PC of the
person setting up the network, either directly or via a hub.
2-2 Connecting the PC of the person setting up the network and
the IP Video Intercom Adaptor
5
Registering the IP Video Intercom Adaptor
Provisionally register the IP Video Intercom Adaptor in
order to configure its settings.
3-1 Registering the IP Video Intercom Adaptor
6
Configuring the IP Video Intercom
Adaptor network
Login to the IP Video Intercom Adaptor and configure
the network environment.
3-2 Logging in
P.20
3-3-5 Network Settings / Connection Settings
10
STEP 2
Administrator
Administrator PC
STEP 3
User
(Up to 9 PCs)
User PCs
P.53
P.54
Provisional registration
P.17
P.18
P.26