PC Application Basic Operations
5-1-4 Adjust image
If the image displayed on the PC Application screen is
difficult to see, you can adjust the image using [ADJUST]
( j ).
You can adjust the backlight during the day when a bright
background makes it difficult to see.
You can make it brighter at night when it is darker.
・
If you click [ADJUST] again while the image is being
adjusted, the image is returned to the status from before
adjustments were made.
Backlight adjustment, Night sensitivity adjustment image
<Day>
[Before adjustment]
[After adjustment]
MEMO
•
If the door station is operated from another PC Application
at the same time as Adjust image, the operation may not
be enabled, due to communication overlap and control
processing.
Clicking [ADJUST] ( j ) at night may make visitors' faces
•
easier to see, but may also make moving objects more
difficult to see.
•
The discrimination between day and night is performed
automatically by the door station.
1
<Night>
[Before adjustment]
[After adjustment]
5-1-5 Room-to-room communication
(Communication with a master monitor station)
Mutual calls and communication are possible between the
PC Application and the master monitor station.
Receiving a call from / communicating with the
master monitor station
1.
A call tone sounds when there is a call from the master
monitor station, and a message is displayed in the PC
Application's [MESSAGE] display ( j ).
・
All PC Applications are called when there is a call from any
of the master monitor stations in the system.
*
If the check mark is removed from Call Tone in "Event
Notification Settings"
・
When the master monitor station ends room-to-room
communication, the PC Application returns to standby status
(this includes call timeouts).
(Orange) 1 CALL ROOM ST (Numbers
Status:
indicate the order of the calls)
MESSAGE: <Adaptor Name> CALL FROM ROOM STATION
2.
When this happens, click [TALK] ( k ).
・
You can then talk to the master monitor station.
3.
To end the communication, click [OFF] ( l ).
・
The PC Application returns to standby status.
42
, the call tone will not sound.
P.36
1
2
3