Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

 
JKW-IP
T H
E N G
I P L
S T R
m
1 1 m
1 . 2
0 . 6 5
JKW-IP
IP Video Intercom Adaptor
L A N
OPERATION MANUAL
FK1594
P1210AQ 53715

Summary of Contents

  • Page 1

    JKW-IP IP Video Intercom Adaptor L A N E N G I P L S T R 1 1 m 1 . 2 ∼ 0 . 6 5 FK1594 P1210AQ 53715 JKW-IP IP Video Intercom Adaptor OPERATION MANUAL...

  • Page 2: Table Of Contents

    INTRODUCTION ... 6 System Configuration Example ... 6 Names ... 7 IP Video Intercom Adaptor ...7 PC Application Window ...8 About System Settings ... 10 Starting up the IP Video Intercom Adaptor ...12 Installing the PC Application ...12 1-5-1 System Requirements ...12 1-5-2 Installing ...13 1-5-3 Uninstalling ...15 1-5-4 Starting up the PC Application ...15...

  • Page 3

    It may fall or tip over and possibly damage the unit. 5. For power supply, use Aiphone power supply model or model specified for use with system. If non-specified product is used, fire or malfunction could result.

  • Page 4

    We recommend that you change the ID/Password on a regular basis. • Depending on the broadband router, it may not operate. Check our website (http://www.aiphone.net/) for a list of supported broadband routers.

  • Page 5

    We will under no conditions be liable for any damages or losses resulting from this product's contents or specifications. • This manual was created by Aiphone Co., Ltd., all rights reserved. Copying a part of or this entire manual without prior permission from Aiphone Co., Ltd. is strictly forbidden.

  • Page 6: Introduction 6, System Configuration Example

    ● ● ● ● Video door station Master monitor station JK-DA, JK-DV or JK-DVF JK-1MED or JK-1MD IP Video Intercom Adaptor JKW-IP LA N NG TH Master monitor P LE ST RI 11 mm 0.6 5 station JK-1MED or JK-1MD...

  • Page 7: Names, Ip Video Intercom Adaptor

    1-2 Names IP Video Intercom Adaptor AIPHONE JKW-IP STATUS indicator (Orange) Blinks orange while the system starts up, and remains lit once startup is complete. Indicator operation summary Indicator LAN ACT indicator (Orange) STATUS indicator (Orange) POWER indicator (Green) LAN ACT...

  • Page 8: Pc Application Window

    INTRODUCTION PC Application Windows The PC Application window consists of a "Standard Window" and an "Expanded Window". You can switch between the Standard Window and the Expanded Window by clicking the [Standard window] or [Expand window] button. Standard Window In the Standard Window, you can perform the following setting operations. [SENSOR] display Displays the status of incoming signal(s) from option unit(s)

  • Page 9

    Expanded Window The following explains the various buttons in the Expanded Window and the display contents. The content on the left-hand side of the window is the same as the Standard Window. [Adaptor] display Displays the IP Video Intercom Adaptor Name If no name is set, the MAC Address is displayed [No] display Displays the IP Video Intercom Adaptor number...

  • Page 10: About System Settings

    INTRODUCTION 1-3 About System Settings MEMO Be sure to check the system configuration before making settings, and then connect the units correctly. • You need to contact your provider (ISP) to connect to the Internet. • Before making settings, be sure to obtain necessary information such as the Static IP Address, Email •...

  • Page 11

    Registration of the IP Video Intercom Adaptor by the STEP 2 Administrator Installing the PC Application Install the PC Application onto the Administrator PC. 1-5 Installing the PC Application P.12 Administrator PC network settings Set the IP Address on the Administrator PC. 2-1 PC Network Settings P.16 Registering the IP Video Intercom Adaptor...

  • Page 12: Starting Up The Ip Video Intercom Adaptor, Installing The Pc Application, System Requirements

    INTRODUCTION 1-4 Starting up the IP Video Intercom Adaptor Use the following steps to start up the IP Video Intercom Adaptor. Check that the wires are connected correctly. Turn on all connected equipment except for the IP Video Intercom Adaptor. Turn on the POWER switch for the IP Video Intercom Adaptor.

  • Page 13: Installing

    1-5-2 Installing This section describes how to install the PC Application into your PC. • The screens may differ depending on the OS. • Follow the on-screen instructions to install. Insert the CD-ROM into your computer. Operation Manual & Software (CD-ROM) Click "English"...

  • Page 14

    INTRODUCTION Click [Next]. ・ The Select Installation Folder window is displayed. Click [Next]. ・ The folder in which the application is to be installed is created. Click [Next]. ・ Installation begins. When the installation is complete, the Select Recording File Storage Folder (Browse for Folder) window is displayed.

  • Page 15: Uninstalling, Starting Up The Pc Application

    Aiphone_JKW You can also start up the PC Application by selecting "Aiphone_JKW" from the "All Programs" list in the "start" menu. Alternatively, you can run "JKW-IP.exe" from the installation folder (C:\Program Files\Aiphone_JKW). When selecting from the "All Programs" list When running "JKW-IP.exe"...

  • Page 16: Network Settings, Pc Network Settings

    Network Settings Network Settings 2-1 PC Network Settings Set the IP Address, Subnet Mask, and other necessary information on the PC of the person setting up the network, the Administrator PC, and the User PCs, according to the network environment. From the Windows "start"...

  • Page 17: Setting Up The Network And The Ip Video Intercom Adaptor

    Ethernet crossover cable LA N NG TH P LE ST RI 11 mm 0.6 5∼ IP Video Intercom Adaptor JKW-IP Straight cable LA N NG TH P LE ST RI 11 mm 0.6 5∼ IP Video Intercom Adaptor...

  • Page 18: Ip Video Intercom Adaptor Settings, Registering The Ip Video Intercom, Adaptor

    You need a Static Global IP Address for the Global IP Address. It does not support DDNS service. ・ If you do not know your Local IP Address, run "JKW-IP IP SEARCH" from the CD-ROM supplied, and then click the "Search" button. It searches for the IP Video Intercom Adaptor on the network, and then displays the MAC Address and the IP Address.

  • Page 19

    For provisional registration and for the Administrator, enter • "aiphone" as the ID, and "aiphone" as the Password. If they are not entered correctly, an ID error will occur for login. If a User, the ID and Password that were registered by the •...

  • Page 20: Logging In

    IP Video Intercom Adaptor Settings 3-2 Logging in To modify IP Video Intercom Adaptor settings, you first need to login. MEMO • Since you are not registered as a User before setting up, you can only login as the Administrator. You can login as the "Administrator"...

  • Page 21: Administrator Settings, Administrator Registration

    Provisional registration 3-3-1 Administrator Registration In Ad minist rator Regist ration, you can change the Administrator ID and Administrator Password. The default settings are - Administrator ID: "aiphone" and Administrator Password: "aiphone". We recommend changing the default password. MEMO •...

  • Page 22: User Registration

    IP Video Intercom Adaptor Settings Enter a password in New Password. ・ You can enter up to 16 single-byte alphanumeric characters for the password. Enter the new password again in the "Re-type" field as confirmation. Click [SAVE]. ・ "[Administrator Registration] Setting has been saved." is displayed, the entered ID and new password are set, and you are returned to the Administrator Settings window.

  • Page 23: Email Setting (ip Video Intercom Adaptor)

    Click [SAVE]. ・ "[User Registration] Setting has been saved." is displayed, and you are returned to the Administrator Settings window. MEMO • Setting operations are canceled if you click [CANCEL], and you are returned to the Administrator Settings window. • All settings are returned to their factory default settings if you press the IP Video Intercom Adaptor default setting switch for 5 seconds or more.

  • Page 24: Sensor Input / Option Output Settings

    IP Video Intercom Adaptor Settings Click [SAVE]. ・ "[Email] Set t i ng has been saved." is d isplayed, the entered Email address is set, and you are returned to the Administrator Settings window. MEMO Setting operations are canceled if you click [CANCEL], and •...

  • Page 25

    Select Input latch and Sensor IN settings between 1 and 4 and make optional settings. *1 The following table shows the detection operation of sensor input if the input latch setting of the IP Video Intercom Adaptor is different from the sensor input settings of the master monitor station.

  • Page 26

    IP Video Intercom Adaptor Settings 3-3-5 Network Settings The following 5 settings come under Network Settings. • Connection Settings • Adaptor Name Settings • Adaptor Language Settings • Update Encryption Key File • Video Setting MEMO If you are logged in as a User, you cannot make Network •...

  • Page 27

    For Global, it may be necessary to change ports when you are using multiple IP Video Intercom Adaptors or PC Applications. Please check our homepage at http://www. aiphone.net for more details. ・ For the broadband router setting information, see the Operation Manual supplied with the broadband router.

  • Page 28

    IP Video Intercom Adaptor Settings Adaptor Language Settings You can select the language used for the IP Video Intercom Adaptor Email transmissions, etc. from "English", "French", "Spanish", "German", "Dutch", "Italian", and "Japanese". The default setting is "English". Click the d rop - dow n menu but ton for "Ad aptor Language", and then select the language.

  • Page 29: Log Downloading / Firmware Update

    3-3-6 Log Downloading / Firmware Update Log Downloading (for Inspections and Maintenance) For maintenance and inspection, you can acquire the operations log from the IP Video Intercom Adaptor. MEMO • If you are logged in as a User, you cannot perform a Log Downloading/Firmware Update.

  • Page 30

    The Internet Information Services are not available for Windows XP Home Edition. Please check our homepage at http://www.aiphone.net. Downloading Updated Firmware Data Please access our homepage at http://www.aiphone.net/ and download the firmware data. For the download procedure, see the instructions on our homepage.

  • Page 31

    ・ The downloaded update file is written to the circuit board. Writing takes about 2 minutes. ・ "Firmware update was completed successfully." is displayed, and the update process is complete. MEMO • Do not turn off the power while the firmware is being written. If the power is turned off while it is writing, the product will malfunction.

  • Page 32: User Settings, Downloading Encryption Key

    IP Video Intercom Adaptor Settings 3-4 User Settings User Settings for the PC Application can be made from the User Settings window while logged in as the Administrator or a User. 3-4-1 Downloading Encryption Key To use the Door release and Option Output with the PC Application, you need to obtain the Encryption Key Files from each IP Video Intercom Adaptor beforehand and set them for the respective IP Video Intercom Adaptors with the...

  • Page 33: Email Setting

    Select the Encryption Key File corresponding to the selected "Adaptor". Click [SAVE]. ・ The Encryption Key is set, and you are returned to the Expanded Window. MEMO • Setting operations are canceled if you click [CANCEL], and you are returned to the Expanded Window. ・...

  • Page 34

    IP Video Intercom Adaptor Settings Setting the Target Email Address and the Email Timing Register the Email Address of the receiver to which a notification is to be sent when a Door Call, Sensor Detection, or System Start is detected. In the Email Timing settings, you can set whether or not Email is transmitted when Door Call, Sensor Detection, or System Start is detected.

  • Page 35: Pc Application Settings, Setting The Pc Application, Volume Settings

    PC Application Settings 4-1 Setting the PC Application Various settings for the PC Application can be made from the PC Application Settings window. Use the following method to display the PC Application Settings window. Starting up the PC Application ・ The Expanded Window is displayed.

  • Page 36: Preferences Settings

    PC Application Settings Click [SAVE]. ・ The Volumes are set and the PC Application Settings window closes. MEMO • Setting operations are canceled if you click [CANCEL], and the PC Application Settings window closes. • The Microphone Volume and Speaker Volume settings are synchronized with the computer's settings.

  • Page 37

    Event Notification Operation List Setting Description When there is a call from (one of) the door Maximize station(s), or when Sensor Detection occurs Application (even when minimized), the PC Application is automatically maximized. When there is a call from (one of) the door Balloon station(s), or when Sensor Detection occurs, Notification...

  • Page 38

    PC Application Settings Audio Recording Settings You can select whether or not to make an audio recording during manual video recording. The default setting is "OFF" (No audio recording performed). Click [ON] or [OFF] in Audio Recording. ・ When performing Audio Recording, be sure to set Picture Recording Mode to [Video].

  • Page 39: Pc Application Basic Operations, Video Intercom Functions, Answering A Call From The Door Station

    PC Application Basic Operations 5-1 Video Intercom Functions By using the PC Application, you can operate the following video intercom functions for the video intercom system and synchronized devices (electronic door lock and other connected devices, etc.) connected to the IP Video Intercom Adaptor. Controllable Video Intercom Functions Answering a call from the door station Door release...

  • Page 40: Door Release

    PC Application Basic Operations Click [TALK] ( j ), for a call from the door station. ・ You can click [TALK] ( j ) to communicate, even if the screen for image acquisition is displayed. Status: (Green) COMMUNICATION <Adaptor Name> DOOR <Door station No.> MESSAGE: COMMUNICATING ・...

  • Page 41: Zoom/wide, Pan & Tilt

    5-1-3 Zoom/Wide, Pan & Tilt By using the following steps, the monitor screen of the PC Application can be switched between a wide picture and a zoom picture. • Calling from the door station • Entrance monitoring • Communicating with the door station By using Pan &...

  • Page 42: Adjust Image

    PC Application Basic Operations 5-1-4 Adjust image If the image displayed on the PC Application screen is difficult to see, you can adjust the image using [ADJUST] ( j ). You can adjust the backlight during the day when a bright background makes it difficult to see.

  • Page 43

    Calling / communicating with the master monitor station If you want to call a master monitor station from the PC Application, you can choose to call all master monitor stations in the system, or call one specific master monitor station. From the "Adaptor"...

  • Page 44: Entrance Monitoring

    PC Application Basic Operations 5-1-6 Entrance monitoring You can monitor a door station from the PC Application. From the "Adaptor" display ( j ) in the Expanded Window, select one door station-connected IP Video Intercom Adaptor you want to monitor. ・...

  • Page 45: Sensor Detection From Connected Equipment, Option Output From Ip Video Intercom Adaptor, Balloon Notification

    5-1-7 Sensor Detection from Connected Equipment You will be notified by the PC Application if sensors connected to the master monitor station and IP Video Intercom Adaptor are activated. If a sensor detects an abnormality, or the connected call button etc. is pressed, the Sensor Detection Tone occurs. 、...

  • Page 46: Recording Function, Auto Recording

    PC Application Basic Operations 5-2 Recording Function The PC Application can record images from the video intercom system connected to the IP Video Intercom Adaptor automatically or manually. 5-2-1 Auto Recording W hen a call is received f rom the door st ation, the entranceway images are recorded automatically.

  • Page 47: Manual Recording

    5-2-2 Manual recording You can make a snapshot recording or video recording of the entrance when the following conditions are met. • Calling from the door station • Entrance monitoring • Communicating with the door station Snapshot recording You can only record one snapshot image of the entrance manually when the following conditions are met.

  • Page 48: Playback Function, Play Recorded Image

    PC Application Basic Operations 5-3 Playback Function In the PC Application, you can play back, stop, pause, slow down the playback, and fast forward the recorded images. You can delete any unnecessary recorded files. 5-3-1 Play recorded image Click [ u (Open play window)] ( j ) in the Standard Window.

  • Page 49: Deleting A Recorded File, Sending Email

    When there is a call from the door <Adaptor Name> station When the master monitor station <Adaptor Name> detects External (Sensor) input When JKW-IP detects External <Adaptor Name> (Sensor) input When the system <Adaptor Name> starts up MEMO • The mail title and text cannot be changed.

  • Page 50: Others

    Administrator JKW-IP ̶ Administrator JKW-IP ̶ Administrator JKW-IP ̶ Administrator JKW-IP Administrator JKW-IP Administrator JKW-IP English Administrator JKW-IP QVGA (320x240) Administrator JKW-IP 15 fps Administrator JKW-IP Administrator JKW-IP N.O. Administrator JKW-IP Continuous Administrator JKW-IP N.O. Administrator JKW-IP 3 seconds Administrator JKW-IP...

  • Page 51

    *1 Supported symbols ! # $ % & ’ * + - / ? ^ _ ` { | } ~ ( ) < > [ ] ; @ . * 2 Supported symbols ! # $ % & ’ * + - / = ? ^ _ ` { | } ~ ( ) < > [ ] : ; , @ . * 3 Supported symbols ! # $ % &...

  • Page 52: Technical Precautions, Specifications

    Cleaning: Clean the units with a soft cloth dampened with a neutral household cleanser. Do not use an abrasive cleanser or cloth. ・ If you are experiencing difficulties with the device such as "Settings not working well", please check our homepage at http:// www.aiphone.net/. Item Power Current consumption...

  • Page 53: Settings Information Memo

    Settings Information Memo Record your settings information. It will need when resetting or maintenance. IP Video Intercom Adaptor registration Item IP Address (Static) Connection Port IP Video Intercom Adaptor Connection Password Web Port PC Local (LAN) IP Address Connection Port Audio Port Video Port PC Application...

  • Page 54: Example Of Registration

    For LAN / WAN HUB / Router ② ① LA N NG TH P LE ST RI 11 mm 0.6 5∼ IP Video Intercom Adaptor ① Local IP Address and Subnet Mask that were allocated to the IP Video Intercom Adaptor *: The values shown above are the factory default settings.

  • Page 55

    For Global ① Local IP Address and Subnet Mask of the IP Video Intercom Adaptor *: For the broadband router setting information, see the Operation Manual supplied with the broadband router. *: The values shown above are the factory default settings. Broadband router ③...

  • Page 56: Warranty

    Aiphone warrants thats its products have no material or workmanship defects under normal use conditions for two years after delivery to the end user. Aiphone will perform repair or replacement free of charge if the product is defective and the warranty applies to the defect. Aiphone reserves unto itself the sole right to make the final decision whether there is a defect in materials and/or workmanship and whether or not the product is under warranty.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: