Aiphone JKW-IP Operation Manual page 9

Expanded Window
The following explains the various buttons in the Expanded Window
and the display contents.
The content on the left-hand side of the window is the same as the
Standard Window.
[Adaptor] display
Displays the IP Video Intercom Adaptor Name
If no name is set, the MAC Address is displayed
[No] display
Displays the IP Video Intercom Adaptor number
Selects the IP Video Intercom Adaptor
[ （q – p） ] buttons
Changes the order of the IP Video Intercom Adaptor display
MEMO
• You can select the corresponding IP Video Intercom Adaptor by clicking the line for the
optional IP Video Intercom Adaptor. Clear the selection by clicking the selected IP Video
Intercom Adaptor again.
• Status display cannot indicate the usage status of other PC Applications.
• To delete an IP Video Intercom Adaptor, move the mouse's pointer to the IP Video Intercom
Adaptor you want to delete in the "disconnected" status, right-click, and then select
"Delete".
9
[Status] display
Displays the IP Video Intercom Adaptor status
Color Comment
Displayed when there is a
Red 1 CALL DOOR
call from the door station
Displayed during
Green COMMUNICATION
communication
Green MONITOR Displayed during monitoring
Displayed when there is
Orange 1 CALL ROOM ST a call from the master
monitor station
Displayed when there is a
Orange CALL
call from the PC Application
Encryption key not acquired
Gray <No display>
(During standby)
Blue <No display> Displayed during standby
With Windows 7, the color of the program displayed in
the taskbar changes linked with the [Status].
[Standard window] button
Switches to the Standard Window
P.8
[Sensor] display
Displays the status of incoming
signals from option unit(s)
Color
Blue Sensor input 1 active
1
Blue Sensor input 2 active
2
Blue Sensor input 3 active
3
Blue Sensor input 4 active
4
Master monitor station
Blue
M
sensor input active
P.45
[SETTINGS] button
Opens the settings window for
the IP Video Intercom Adaptor
P.20
INTRODUCTION
Description
Description