PC Application Basic Operations
5-1-6 Entrance monitoring
You can monitor a door station from the PC Application.
1.
From the "Adaptor" display ( j ) in the Expanded
Window, select one door station-connected IP Video
Intercom Adaptor you want to monitor.
・
If an Adaptor is selected, you can release it by clicking it
again.
MEMO
•
You can only select one Adaptor to monitor the door station.
2.
Click [MONITOR] ( k ).
Status:
(Green) MONITOR
MESSAGE: <Adaptor Name> DOOR <Door station No.> MONITORING
・
The image from the door station connected to the selected
Adaptor is displayed, and audio is received.
・
While monitoring, click [TALK] ( l ) to begin talking. At
night, the door station's LED for night illumination lights.
・
The discrimination between day and night is performed
automatically by the door station.
1
2
3
MEMO
•
The entrance monitoring tur ns off automatically after
approximately 1 minute. To monitor the entrance again,
repeat from 1.
•
During entrance monitoring, the entrance monitoring time
can be extended by approximately 1 minute by clicking
[MONITOR] again.
•
During entrance monitoring, the screen is set to the wide
screen display. It switches to the zoom screen when the
[ZOOM / WIDE] button is clicked.
At night, the door station's LED for night illumination does
•
not light until [TALK] (
3.
To finish monitoring, click [OFF] ( m ).
・
The PC Application returns to standby status.
・
When the monitor display time has elapsed, the monitoring
is automatically switched off, and it returns to standby
status.
44
l
) is clicked.
4