Logging In - Aiphone JKW-IP Operation Manual

IP Video Intercom Adaptor Settings

3-2 Logging in

To modify IP Video Intercom Adaptor settings, you first
need to login.
MEMO
• Since you are not registered as a User before setting up, you
can only login as the Administrator.
You can login as the "Administrator" or a "User". Setting
items are restricted depending on which you use to login.
Login using the following method.
1.
Start up the PC Application, and select an optional
"Adaptor" from the Expanded Window.
2.
Click [SETTINGS].
MEMO
• If the security warning and virus check program warning
screens are displayed during start up, please approve them.
Provisional registration
・
Login is complete, and the User Set tings window is
displayed.
・
Administrator / User are differentiated by the ID entered.
MEMO
• If the "Status" display is not displayed, the IP Video Intercom
Adaptor is not "connected". Select the relevant IP Video
Intercom Adaptor, right-click, and then select "Connect"
from the menu displayed to connect the IP Video Intercom
Adaptor.
• If the check mark has been removed from "Remember these
settings" in the Adaptor Registration window, you need to
enter the registration information again. See "Registering the
IP Video Intercom Adaptor"
• If no operations are performed for a set amount of time after
login, timeout automatically occurs. When an operation is
next performed, the message "The session has expired. Please
login again." is displayed. Login again.
• If the ID and Password were not entered when the IP Video
Intercom Adaptor was registered, or if the wrong ID and
Password were entered, it will be necessary to enter the ID
and Password here.
20
Registration : Administrator/User
P.18 for more details.