Page 1
FK1594 P0410AQ 52276 JKW-IP IP Video Intercom Adaptor JKW-IP IP Video Intercom Adaptor L A N E N G I P L S T R 1 1 m 1 . 2 ∼ 0 . 6 5 OPERATION MANUAL...
CONTENTS INTRODUCTION ......6 PC Application Basic Operations ..41 System Configuration Example ..6 Video Intercom Functions ....41 Names (IP Video Intercom Adaptor) .. 7 4-1-1 Answering a call from the door station..41 4-1-2 Door release ........42 Setting Order........8 4-1-3 Zoom/Wide, Pan &...
It may fall or tip over and possibly damage the unit. 5. For power supply, use Aiphone power supply model or model specified for use with system. If non-specified product is used, fire or malfunction could result.
Page 4
• Depending on the router, it may not operate. Check our website (http://www.aiphone.net/) for a list of supported routers. • If you cannot access the IP Video Intercom Adaptor, or if a problem occurs such as Email not being received correctly, turn the power to the IP Video Intercom Adaptor off and then on again, and restart the main unit.
Page 5
We will under no conditions be liable for any damages or losses resulting from this product's contents or specifications. • This manual was created by Aiphone Co., Ltd., all rights reserved. Copying a part of or this entire manual without prior permission from Aiphone Co., Ltd. is strictly forbidden.
INTRODUCTION INTRODUCTION 1-1 System Configuration Example For Local IP Video Intercom Adaptor N.O. / N.C. JKW-IP Sensor input 1 Sensor input 2 LA N NG TH Master monitor P LE ST RI 11 mm transformer 0.6 5 Sensor input 3...
Connects to buttons, sensors, etc. for option LAN ACT units. STATUS LAN port POWER AIPHONE JKW-IP Connects networking unit such as router. STATUS indicator (Orange) LAN ACT indicator (Orange) Blinks orange while the system Lit orange when a L A N is...
INTRODUCTION 1-3 Setting Order MEMO Be sure to check the system configuration before making settings, and then connect the units correctly. • You need to contact your provider (ISP) to connect to the Internet. • Before making settings, be sure to obtain necessary information such as the Static IP Address, Email •...
INTRODUCTION 1-4 Starting up the IP Video Intercom Adaptor Use the following steps to start up the IP Video Intercom Adaptor. Check that the wires are connected correctly. Turn on all connected equipment except for the IP Video Intercom Adaptor. Turn on the POWER switch for the IP Video Intercom Adaptor.
INTRODUCTION 1-5-2 Installing ・ If ".NET Framework" is not already installed, the .NET Framework installation window is displayed. Follow the on- Insert the CD-ROM into your computer. screen instructions to install. MEMO When starting up the application, if a security or virus •...
Page 11
INTRODUCTION Click [Next]. When the installation is complete, the Select Recording ・ File Storage Folder (Browse for Folder) window is The Select Installation Folder window is displayed. displayed. Click [Next]. Select the folder where you want to save recorded files, ・...
INTRODUCTION 1-5-3 Uninstalling From the Windows "start" menu, select "Control Panel" " "Add or Remove Programs", and select "Aiphone_JKW" to delete it. 1-5-4 Starting up the PC Application To start up the PC Application, double-click the " " icon on the desktop. Aiphone_JKW You can also start up the PC Application by selecting "Aiphone_JKW"...
INTRODUCTION 1-6 PC Application Window Names The PC Application window consists of a "Standard Window" and an "Expanded Window". You can switch between the Standard Window and the Expanded Window by clicking the [Standard window] or [Expand window] button. Standard Window In the Standard Window, you can perform the following setting operations.
INTRODUCTION Expanded Window The following explains the various buttons in the Expanded Window and the display contents. The content on the left-hand side of the window is the same as the Standard Window. [Status] display Displays the Adaptor status Color Comment Description Displayed when there is a...
・ The Adaptor Registration window is displayed. MEMO Enter "aiphone" as the ID, and "aiphone" as the Password. If • they are not entered correctly, an ID error will occur for login. You need a Static Global IP Address for the Global IP •...
Page 16
For Global, it may be necessary to change ports when you are using multiple IP Video Intercom Adaptors or PC Applications. Please check our homepage at http://www. aiphone.net for more details. ・ For the router setting information, see the Operation Manual...
IP Video Intercom Adaptor Settings 2-2 Logging in Administrator User To modify IP Video Intercom Adaptor settings, you first need to login. MEMO • Since you are not registered as a User before setting up, you can only login as the Administrator. You can login as the "Administrator"...
Administrator ID and Administrator Password. The MEMO • You cannot change settings for multiple IP Video Intercom default settings are - Administrator ID: "aiphone" and Adaptors at the same time. Make various settings for each IP Administrator Password: "aiphone". Video Intercom Adaptor.
IP Video Intercom Adaptor Settings 2-3-2 User Registration Enter a password in New Password. ・ Users other than the Administrator can be registered to You can enter up to 16 single-byte alphanumeric allow them to use the IP Video Intercom Adaptor. Enter the characters for the password.
IP Video Intercom Adaptor Settings 2-3-3 Email Setting (Adaptor) Click [SAVE]. ・ In Email Setting, you can set information on the origin of "[User Registration] Setting has been saved." is displayed, the sent Email. and you are returned to the Administrator Settings window. MEMO If you are logged in as a User, you cannot perform Email •...
IP Video Intercom Adaptor Settings Click [SAVE]. 2-3-4 Sensor input / Option output Settings ・ "[Email] Set t i ng has been saved." is d isplayed, the In Sensor input / Option output Settings, you can set the entered Email address is set, and you are returned to the Sensor input detection method, and select the Option output Administrator Settings window.
Page 22
IP Video Intercom Adaptor Settings Select Sensor IN settings between 1 and 4 and make Click [SAVE]. ・ optional settings. "[Sensor IN / Option OUT] Setting has been saved." is displayed, the Sensor input / Option output are set, and you are returned to the Administrator Settings window.
IP Video Intercom Adaptor Settings 2-3-5 Network Settings Connection Settings You can change the Static IP Address setting for the IP The following 6 settings come under Network Settings. Video Intercom Adaptor. The default settings are - IP • Connection Settings •...
Page 24
For Global, it may be necessary to change ports when Click [OK]. you are using multiple IP Video Intercom Adaptors or PC Applications. Please check our homepage at http://www. aiphone.net for more details. ・ "The encryption key file was updated." is displayed. ・...
Page 25
IP Video Intercom Adaptor Settings Adaptor Name Settings Adaptor Language Settings You can change the name of the IP Video Intercom Adaptor. You can select the language used for the IP Video Intercom The "MAC Address" is entered as the default. Adaptor Email transmissions, etc.
Page 26
IP Video Intercom Adaptor Settings Video Setting MEMO • All settings are returned to their defaults if you press the IP Video Intercom Adaptor default setting switch for 5 seconds Select the Frame Rate from "1fps", "5fps", "10fps", and or more. "15fps", and select the Quality from "1 (Low)"...
IP Video Intercom Adaptor Settings Click [Save]. 2-3-6 Log Downloading/Firmware Update ・ The Save As dialog is displayed and you can give the file a Log Downloading name. You can acquire an operations log from the IP Video Intercom Adaptor. MEMO •...
Page 28
Downloading Updated Firmware Data MEMO • When entering the Update Firmware, please omit the periods Please access our homepage at http://www.aiphone.net/ and ".". For example: If the version is "1.01", enter "101" download the firmware data. • For the FTP Server Address, enter the name of the server For the download procedure, see the instructions on our where the update file is saved.
Page 29
IP Video Intercom Adaptor Settings ・ The downloaded update file is written to the circuit board. Writing takes about 2 minutes. ・ "Firmware update was completed successfully." is displayed, and the update process is complete. MEMO • Do not turn off the power while the firmware is being written. If the power is turned off while it is writing, the product will malfunction.
You can register up to 9 users to one IP Video Intercom Connection Port, Connection Password, and Web Port to be Adaptor. entered. The default settings are - IP Address: "192.168.0.30", Connection Port: "5060", Connection Password: "aiphone", MEMO Contact your Administrator for information about the IP •...
Page 31
For Global, it may be necessary to change ports when you are using multiple IP Video Intercom Adaptors or PC Applications. Please check our homepage at http://www. aiphone.net for more details. ・ For the router setting information, see the Operation Manual...
IP Video Intercom Adaptor Settings 2-5 User Settings Administrator User User Settings for the PC Application can be made from the Click [Save]. User Settings window while logged in as the Administrator ・ The Save As dialog screen is displayed and you can give the or a User.
IP Video Intercom Adaptor Settings Select the Encryption Key File corresponding to the 2-5-2 Email Setting selected "Adaptor". Various User Settings for the PC Application can be made from the User Settings window while logged in as the Administrator or a User. MEMO •...
Page 34
IP Video Intercom Adaptor Settings Click [SAVE]. Setting the Target Email Address and the Email Timing ・ "[Email Setting] Setting has been saved." is displayed, the Register the Email Address of the receiver to which entered Email Address is set, and you are returned to the a notification is to be sent when a Door Call, Sensor User Settings window.
PC Application Settings PC Application Settings 3-1 Setting the PC Application Administrator User Various settings for the PC Application can be made from 3-1-1 Volume Settings the PC Application Settings window. To adjust the volume, click the "Volume" tab from the PC Use the following method to display the PC Application Application Settings window to display the settings screen.
Page 36
PC Application Settings Click [SAVE]. Speaker Volume Settings ・ The Microphone Volume is set and the PC Application The Speaker Volume can be set. Settings window closes. Move the Speaker Volume slider left or right to set the optimum volume. MEMO •...
PC Application Settings Tone Volume Settings 3-1-2 Preference Settings The Tone Volume can be set. It is linked to Call Tone and To adjust the Preference Settings, click the "Preference" tab Sensor Detection Tone. from the PC Applications Settings window to display the settings screen.
Page 38
PC Application Settings Event Action Settings Picture Recording Mode Settings You can set Maximize Application (screen display), Balloon You ca n choose t he i mage record i ng met hod f rom Notification, Sensor Detection Tone, and Call Tone to either "Snapshot"...
Page 39
PC Application Settings Max Recording Space Settings Auto Recording Settings You can set the Max Recording Space for images to between You can select whether or not to automatically record "00.01" and "10.00" GB. The default setting is "01.00". images of the door station when a call is received from the door station.
Page 40
PC Application Settings Audio Recording Settings You can select whether or not to make an audio recording during manual video recording. The default setting is "OFF" (No audio recording performed). Click [ON] or [OFF] in Audio Recording. ・ When performing Audio Recording, be sure to set Picture Recording Mode to [Video].
PC Application Basic Operations PC Application Basic Operations 4-1 Video Intercom Functions By using the PC Application, you can operate the following The screen for image acquisition is displayed until the video intercom functions for the video intercom system and image is displayed on the PC Application screen.
PC Application Basic Operations Click [TALK] ( j ), for a call from the door station. 4-1-2 Door release ・ You can click [TALK] ( j ) to communicate, even if the While being called from the door station, talking or screen for image acquisition is displayed.
PC Application Basic Operations 4-1-3 Zoom/Wide, Pan & Tilt Pan & Tilt operation By using the following steps, the monitor screen of the PC (Pan & tilt)] ( k ) pqtu buttons while a Click the [ Application can be switched between a wide picture and a zoom picture is displayed.
PC Application Basic Operations 4-1-4 Adjust image 4-1-5 Room-to-room communication (Communication with a master monitor station) If the image displayed on the PC Application screen is Mutual calls and communication are possible between the difficult to see, you can adjust the image using [ADJUST] PC Application and the master monitor station.
Page 45
PC Application Basic Operations You can communicate when a master monitor station Calling / communicating with the master monitor station starts the communication. If you want to call a master monitor station from the PC ・ When you are calling all the master monitor stations, Application, you can choose to call all master monitor communicate with the master monitor station which stations in the system, or call one specific master monitor...
PC Application Basic Operations 4-1-6 Entrance monitoring MEMO The entrance monitoring tur ns off automatically after • approximately 1 minute. To monitor the entrance again, You can monitor a door station from the PC Application. repeat from 1. • During entrance monitoring, the entrance monitoring time From the "Adaptor"...
PC Application Basic Operations 4-1-7 Sensor Detection from Connected Equipment 4-1-8 Option Output from IP Video Intercom Adaptor You will be notif ied by the PC Application if sensors You can operate equipment connected to the IP Video Intercom Adaptor from the PC Application. connected to the master monitor station and IP Video Intercom Adaptor are activated.
PC Application Basic Operations 4-2 Recording Function The PC Application can record images from the video Video recording when Auto Recording is set intercom system connected to the IP Video Intercom A video recording of the entrance is made when the Adaptor automatically or manually.
PC Application Basic Operations Click [ (Rec)] ( j ), while communicating with the door 4-2-2 Manual recording station. You can make a snapshot recording or video recording of the entrance when the following conditions are met. • Calling from the door station •...
PC Application Basic Operations 4-3 Playback Function In the PC Application, you can play back, stop, pause, slow Select a playback operation. down the playback, and fast forward the recorded images. ・ The snapshot or video is displayed on the PC Application You can delete any unnecessary recorded files.
<Adaptor Name> <Adaptor Name> detects External EXTERNAL INPUT (Sensor) input 4-3-2 Deleting a Recorded File When JKW-IP <Adaptor Name> detects External <Adaptor Name> EXTERNAL INPUT <No.> You can delete any unnecessary recorded files. (Sensor) input When the system <Adaptor Name>...
Cleaning: Clean the units with a soft cloth dampened with a neutral household cleanser. Do not use an abrasive cleanser or cloth. ・ If you are experiencing difficulties with the device such as "Settings not working well", please check our homepage at http:// www.aiphone.net/.
Specifications Item Description Power DC18 V Current consumption Standby 110 mA, Maximum 200 mA Communication Hands-free / Priority transmission Image Format JPEG Image Resolution 320×240 (QVGA) Interface 10BASE-T/100BASE-TX Ethernet Network Protocol TCP/IP, UDP/IP, SIP Bandwidth 320 K to 8 Mbps (per IP Video Intercom Adaptor) Environment 0 °...
Aiphone warrants thats its products have no material or workmanship defects under normal use conditions for two years after delivery to the end user. Aiphone will perform repair or replacement free of charge if the product is defective and the warranty applies to the defect. Aiphone reserves unto itself the sole right to make the final decision whether there is a defect in materials and/or workmanship and whether or not the product is under warranty.