Removing A Cabled Hard Drive From A Hard Drive Carrier - Dell E33S001 Owner's Manual

Figure 28. Removing a cabled hard drive carrier
1 hard drive
3 release tab
Next steps
1 If required, install a hard drive in the hard drive carrier and install the hard drive carrier into the hard drive slot in the system.
2 If you are not replacing the hard drive immediately, insert a hard drive carrier in the empty hard drive slot.
3 Follow the procedure listed in
Related links

Removing a cabled hard drive from a hard drive carrier

Installing a cabled hard drive into a hard drive carrier
Installing a 3.5-inch cabled hard drive carrier
Removing a cabled hard drive from a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the
2 Follow the procedure listed in
3 Remove the cabled hard drive carrier.
4 Keep the Phillips #2 screwdriver ready.
Steps
1 Remove the screws from the side of the cabled hard drive carrier.
2 Remove the hard drive from the hard drive carrier.
After working inside your
Safety instructions.
Before working inside your
2 power/data cable
4 hard drive carrier
system.
system.
Installing and removing system components 71