Installing A Cabled Power Supply Unit - Dell E33S001 Owner's Manual

Figure 68. Removing a cabled power supply unit
1 screw
3 P2 cable connector
5 standoff
Next steps
1 Install the cabled PSU.
2 Follow the procedure listed in the After working inside your system section.
Related links

Installing a cabled power supply unit

Installing a cabled power supply unit
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
Steps
1 Slide the PSU into the PSU slot.
2 Align the screw hole on the PSU with the standoff on the chassis.
2 PSU
4 P1 cable connector
6 P3 cable connector
Installing and removing system components 113