Installing A 3.5-Inch Hot Swappable Hard Drive Carrier Blank - Dell E33S001 Owner's Manual

Step
Press the release button and slide the hard drive carrier blank out of the hard drive slot.
Figure 26. Removing a 3.5-inch hot swappable hard drive carrier blank
1 hard drive carrier blank
Next step
If removed, install the front bezel.
Related links
Removing the optional front bezel
Installing the optional front bezel

Installing a 3.5-inch hot swappable hard drive carrier blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1 Follow the safety guidelines listed in Safety instructions section.
2 If installed, remove the front bezel.
Step
Insert the hard drive carrier blank into the hard drive slot, and push the hard drive carrier blank until the release button clicks into place.
2 release button
Installing and removing system components 69