Removing A 3.5-Inch Hard Drive Adapter From A 3.5-Inch Hot Swappable Hard Drive Carrier - Dell E33S001 Owner's Manual

Figure 37. Installing a 3.5-inch hard drive adapter into a hot swappable hard drive carrier
1 3.5-inch hot swappable hard drive carrier
3 hard drive adapter
Next step
Install the 3.5-inch hot swappable hard drive carrier into the system.
Related links
Installing a 2.5-inch hot swappable hard drive into a 3.5-inch hard drive adapter
Installing a hot swappable hard drive carrier
Removing a 3.5-inch hard drive adapter from a 3.5-inch hot
swappable hard drive carrier
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Keep the Phillips #2 screwdriver ready.
3 Remove the 3.5-inch hot swappable hard drive carrier from the system.
Steps
1 Remove the screws from the rails on the 3.5-inch hot swappable hard drive carrier.
2 Lift the 3.5-inch hard drive adapter out of the 3.5-inch hot swappable hard drive carrier.
Figure 38. Removing a 3.5 inch hard drive adapter from a hard drive carrier.
1 3.5-inch hot swappable hard drive carrier
80 Installing and removing system components
2 screw (5)
4 2.5-inch hard drive
2 screw (5)