Installing The Optional Idrac Port Card - Dell E33S001 Owner's Manual

Installing the optional iDRAC port card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
3 Keep the Phillips #2 screwdriver ready.
4 Remove the cooling shroud.
Steps
1 Align and insert the tabs on the iDRAC port card into the slots on the chassis.
2 Insert the iDRAC port card into the connector on the system board.
3 Tighten the screw that secures the iDRAC port card holder to the system board.
Figure 61. Installing the iDRAC port card
1 screw
3 iDRAC port card board
5 tabs on the iDRAC port
104 Installing and removing system components
2 iDRAC port
4 SD vFlash media card slot
6 slots on the chassis