Removing A 2.5-Inch Hot Swappable Hard Drive From A 3.5-Inch Hard Drive Adapter - Dell E33S001 Owner's Manual

3 3.5-inch hard drive adapter
Next step
Remove the 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter.
Related links
Removing a hot swappable hard drive carrier

Removing a 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter

Removing a 2.5-inch hot swappable hard drive from a 3.5-inch
hard drive adapter
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Keep the Phillips #2 screwdriver ready.
3 Remove the 3.5-inch hard drive adapter from the 3.5-inch hot swappable hard drive carrier.
NOTE: A 2.5-inch hot swappable hard drive is installed in a 3.5-inch hard drive adapter, which is then installed in the 3.5-inch hot
swappable hard drive carrier.
Steps
1 Remove the screws from the side of the 3.5-inch hard drive adapter.
2 Remove the 2.5-inch hot swappable hard drive from the 3.5-inch hard drive adapter.
Figure 39. Removing 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter
1 3.5-inch hard drive adapter
3 2.5-inch hot swappable hard drive
Related links
Removing a 3.5-inch hard drive adapter from a 3.5-inch hot swappable hard drive carrier
4 2.5-inch hot swappable hard drive
2 screw (2)
Installing and removing system components 81