Table of Contents
Advertisement
NIC indicator codes
The NIC on the back panel has an indicator that provides information about the network activity and link status. The activity LED indicates
whether the NIC is currently connected or not. The link LED indicates the speed of the connected network.
Figure 8. NIC indicators
1
link indicator
Table 8. NIC indicators
Convention
A
B
C
D
Internal dual SD module indicator codes
The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure the IDSDM for storage or as the
OS boot partition. The IDSDM card offers the following features:
•
Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE:
When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the information
is replicated from one SD card to another.
•
Single card operation — single card operation is supported, but without redundancy.
The following table describes the IDSDM indicator codes:
Status
Link and activity indicators are off
Link indicator is green
Link indicator is amber
Activity indicator is flashing green
2
activity indicator
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network at its maximum
port speed (1 Gbps or 10 Gbps).
The NIC is connected to a valid network at less than its
maximum port speed.
Network data is being sent or received.
About the PowerEdge R230 systems
19
Advertisement
Table of Contents
Troubleshooting
