Palm-Rest Assembly; Removing The Palm-Rest Assembly - Dell Latitude 9430 2-in-1 Service Manual

7. Install the WWAN card.
8. Install the base cover.
9. Install the SIM card tray.
10. Install the SD card.
11. Follow the procedure in

Palm-rest assembly

Removing the palm-rest assembly

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the SD card.
3. Remove the SIM card
4. Remove the base cover.
5. Remove the solid-state
6. Remove the WWAN card.
7. Remove the heat sink.
8. Remove the display assembly.
9. Remove the battery.
10. Remove the left speaker.
11. Remove the right speaker.
12. Remove the WLAN antenna
13. Remove the I/O daughter
14. Remove the power button with fingerprint reader assembly
15. Remove the system board.
16. Remove the USH daughter
17. Remove the WWAN main antenna
About this task
The following images indicate the location of the palm-rest assembly and provide a visual representation of the removal
procedure.
68 Removing and installing components
After working inside your
Before working inside your
tray.
drive.
module.
board.
board.
module.
computer.
computer.
(for systems shipped with a fingerprint reader).
Before working inside your