16. Hold the left side of the system board and partially lift the system board from the system.
CAUTION:
To prevent obstructions while lifting the system board, you should clear the area around the
system board of cables, FFCs, FPCs, and any adhesive items.
NOTE:
For WWAN configurations, after removing the defective system board from the system, install the old shielding
cover back to the defective system board. Do Not discard the shielding cover. The system board must be returned with
the cover.
Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the system board and provides a visual representation of the installation procedure.
Removing and installing components
59