Dell Latitude 9430 2-in-1 Service Manual page 75

Table 3. System setup options—System information menu (continued)
Overview
Minimum Clock Speed
Current Clock Speed
Core Count
Processor ID
Processor L2 Cache
Processor L3 Cache
Microcode Version
Intel Hyper-Threading Capable
64-Bit Technology
Memory Information
Memory Installed
Memory Available
Memory Speed
Memory Channel Mode
Memory Technology
DIMM_SLOT B
DIMM_SLOT A
Devices Information
Panel Type
Video Controller
Video Memory
Wi-Fi Device
Native Resolution
Video BIOS Version
Audio Controller
Bluetooth Device
LOM MAC Address
Pass Through MAC Address
Cellular Device
Table 4. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot mode
Boot Sequence
Secure Digital (SD) Card Boot
Secure Boot
Enable Secure Boot
Displays the minimum processor clock speed.
Displays the current processor clock speed.
Displays the number of cores on the processor.
Displays the processor identification code.
Displays the processor L2 Cache size.
Displays the processor L3 Cache size.
Displays the microcode version.
Displays whether the processor is Hyper-Threading (HT) capable.
Displays whether 64-bit technology is used.
Displays the total computer memory installed.
Displays the total computer memory available.
Displays the memory speed.
Displays single or dual channel mode.
Displays the technology used for the memory.
Displays the DIMM B memory size.
Displays the DIMM A memory size.
Displays the Panel Type of the computer.
Displays the video controller type of the computer.
Displays the video memory information of the computer.
Displays the wireless device information of the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays the Bluetooth device information of the computer.
Displays the LAN On Motherboard (LOM) MAC address of the computer.
Displays the pass through MAC address of the computer.
Displays the M.2 PCIe SSD information of the computer.
Displays the boot mode.
Displays the boot sequence.
Enable or disable the SD card read-only boot.
By default, the Secure Digital (SD) Card Boot option is not enabled.
Enable or disable the secure boot feature.
By default, the option is enabled.
BIOS setup 75