Solid-State Drive; Removing The Solid-State Drive - Dell Latitude 9430 2-in-1 Service Manual

Steps
1. Align and place the base cover on the palm-rest assembly, and snap the base cover into place.
2. Tighten the eight captive screws to secure the base cover to the system.
Next steps
1. Install the SIM card tray.
2. Install the SD card.
3. Follow the procedure in

Solid-state drive

Removing the solid-state drive

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the SD card.
3. Remove the SIM card
4. Remove the base cover.
After working inside your
Before working inside your
tray.
computer.
computer.
Before working inside your
Removing and installing components 21