Connecting A Node Or A Room By Operating The Wires-X Software On The Pc; Communicating With Other Station - Yaesu WIRES-X FT3D Instruction Manual

Connecting a node or a room by operating the WIRES-X software on the PC

On the WIRES-X software main screen, the node may be easily connected to the desired room or node station.
1. Click the Digital Node or Digital Room to connect.
2. Right-click on the selected Node or Room.
The command list is displayed.
3. Click the [connect].
When a connection is successfully established, the
IDLE indicator "
indicator "
Node station or Room "
"Connected" will appear on the LCD of the portable
node station's transceiver or the transceiver accessing
the portable node station in WIRES-X mode.
⿟ Room Pop-up Window
When connecting to the room a window will pop up displaying the operational status of the room. For details, refer
to "Room pop-up window" (page 53).

Communicating with other station

（1） Access Point
1. Access the "frequency" and "WIRES-X DG-ID number" of another C4FM digital transceiver according to the portable
node station for details, refer to the Operating Manual (WIRES-X Edition) of the transceiver.
2. Press the PTT switch on the other transceiver to communicate with the other station on the Internet.
3. Release the PTT switch to return to receive mode.
• When the transceiver of the portable node is transmitting, you may not switch "Access Point" or "Direct Operation" by
pressing the [A/B] key.
• In the Access Point, you may connect to a node or a room on the Internet by operating from another C4FM digital
transceiver accessing the portable node. For details, refer to the Operating Manual (WIRES-X Edition) of each
transceiver.
（2） Direct Operation
The FT3D/FT2D also has the capability to be used only in the Direct Operation. For details, please refer to "FT3D/FT2D
Direct Operation dedicated function" (page 59).
1. Press the PTT switch on the transceiver of the portable node to communicate with the other station.
The TX/BUSY LED lights red but does not transmit radio waves, so the PO meter does not fluctuate.
2. Release the PTT switch to return to receive mode.
he TX/BUSY LED lights green while receiving communication from the other station on the Internet, but the S meter
T
does not fluctuate.
In "Direct Operation" of Portable HRI Mode with an FT3D/FT2D transceiver, the audio from the other station is heard
only from the PC speaker. To adjust the receive volume level, turn the VOL knob of the FT3D/FT2D transceiver, or
adjust the PC speaker volume.
" will change to the NET
", and the User ID of the connected
" is displayed.
48