Ft3D/Ft2D Direct Operation Dedicated Function - Yaesu WIRES-X FT3D Instruction Manual

4. 【This setting is necessary only when using the FT2D
transceiver】
Adjust the volume level of the "Microphone" on the
"Volume Mixer - Speakers" screen so that the voice of
the partner station operating in the digital mode will be
easy to hear.
When the adjustment is completed, proceed to step 7.
Depending on your computer, this setting item may be
missing in the volume mixer. In this case, proceed to step 5.
5. 【This setting is necessary only when using the FT2D
transceiver】
Click the "Speakers" icon on the "Volume Mixer -
Speakers" screen.
The "Speakers Properties" screen opens.
6. 【This setting is necessary only when using the FT2D
transceiver】
Click the [Levels] tab on the "Speakers Properties"
screen, then adjust the volume level of "Microphone" so
that the volume of the other station operating in digital
mode will be adequate.
7. Click the "×" button at the top right of the "Volume Mixer"
window to close.
The audio level adjustment of Direct Operation is completed.

FT3D/FT2D Direct Operation dedicated function

FT3D/FT2D has a setting function related to analog audio that can be used only in Direct Operation of Portable HRI Mode.
⿟ Output of analog voice (uplink) setting
Set whether to output audio to the analog station when talking by pressing the PTT switch.
Each time you press the [V/M] key, it switches between "ON" and "OFF".
OFF： Does not output sound to the analog station. （Default setting）
Turn it off when you do Internet communication only in digital mode.
ON： Audio output to the analog station. "
Always turn on Internet communication when using the analog communication in the analog mode.
• When set to "OFF", the other station operating in analog mode cannot hear this voice.
• When set to "ON", your voice is output from the PC or FT2D speaker.
＊
" Is displayed on the right side of the call sign of the screen.
59