Using The Portable Hri Mode; Connecting The Transceiver And The Pc; Starting The Wires-X Software; Starting The Transceiver In Special Mode - Yaesu Wires-X Instruction Manual

Wide-coverage internet repeater enhancement system, portable digital node function
Hide thumbs Also See for Wires-X:
Table of Contents

Advertisement

Using the Portable HRI Mode

When communicating via the Internet in "Portable HRI Mode", refer to "Adjusting Audio Level in the Access Point
(Portable HRI Mode)" (page 30) or "Adjusting Audio Level in the Direct Operation (Portable HRI Mode)" (page 32)
and adjust the audio level of the computer.

Connecting the transceiver and the PC

Refer to "Communicating with digital or analog FM mode (Portable HRI Mode)" (page 10) and connect the
transceiver to the PC.

Starting the WIRES-X software

1. Double click the [Wires-X] icon on the desktop of the computer screen.
The main screen of WIRES-X software is displayed.
For details on the main screen, refer to "WIRES-X Software Main Screen" (page 28).

Starting the transceiver in special mode

1. Press and hold the [X] key and the [BACK] key simultaneously, while turning the radio ON.
2. Press the [A/B] key to select "Access Point" or "Direct Operation".
Depending on the set operation mode, it is displayed on the frequency display as follows.
Access Point:
Direct Operation: "DIRECT"
To return the transceiver to the normal mode, repeat procedure 1 in the above.
The portable station transceiver cannot use the News Station feature or the GM feature.

Connecting a node or a room by operating the WIRES-X software on the PC

On the WIRES-X software main screen, may be easily connect to the desired room or node station.
1. Click the Digital Node or Digital Room to connect.
2. Right-click on the selected Node or Room.
The command list is displayed.
3. Click the [connect].
When a connection is successfully established, the
IDLE indicator "
indicator "
Node station or Room "
"Connected" will appear on the LCD of the portable
node station's transceiver or the transceiver accessing
the portable node station in WIRES-X mode.
⿟ Room Pop-up Window
When connecting to the room a window will pop up displaying the operational status of the room. For details, refer
to "Room pop-up window" (page 29).
"WIRES-X NODE"
" will change to the NET
", and the User ID of the connected
" is displayed.
26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents