Level adjustment of analog audio output (uplink)
Since the level of the analog sound is set with the personal computer, it is not normally necessary to adjust this level.
If you turn the VOL knob while pressing the PTT switch while the analog audio output (uplink) setting is "ON", it will
be displayed as LEVEL XX (XX: 0 to 31) and the volume level of the analog audio to be sent to the other station may
be adjusted. (The default setting is 10.)
Bookmarking frequently connected Nodes or Rooms
When you save (bookmark) node stations and rooms, they are displayed in the group window, so you can easily access them.
Bookmarking Nodes or Rooms
1. Click on the node station or room you want to bookmark
in "Active node window" or "Active room window".
2. Right-click the selected "Node" or "Room" to display the
command list.
3. Click the [Add to Bookmark].
60