System Requirements (Operating Environment) - Yaesu WIRES-X FT3D Instruction Manual

System Requirements (Operating Environment)

⿟ Supported Transceivers
• FT3D, FT2D, FTM-400XDR/XDE/DR/DE, FTM-300DR/DE or FTM-100DR/DE （As of May 2020）
⿟ Connection Cables
FT3DR/DE or FT2DR/DE

• SCU-39 WIRES-X Connection Cable Kit
(The SCU-39 includes SCU-19, CT-44, and two audio cables.)
FTM-400XDR/XDE/DR/DE or FTM-100DR/DE

When communicating with a digital node station in a portable digital mode
• SCU-20 PC Connection Cable (Supplied with the transceiver)
When communicating with a digital node station or an analog node station in the portable HRI mode via
the Internet
• SCU-40 WIRES-X Connection Cable Kit
(The SCU-40 includes the SCU-20 and an audio cable.)
FTM-300DR/DE

• SCU-40 WIRES-X Connection Cable Kit
(The SCU-40 includes the SCU-20 and an audio cable.)
⿟ The latest WIRES-X Software and Transceiver Firmware
Update to the latest software and firmware on YAESU website.
• WIRES-X Software： Ver.1.530 or later
• FT3D MAIN: Ver.1.01 or later, SUB: Ver.1.01 or later, DSP: Ver.7.02 or later
• FT2D
MAIN: Ver.3.10 or later, SUB: Ver.2.01 or later, DSP: Ver.4.31 or later
• FTM-400XD MAIN: Ver.4.40 or later, DSP: Ver.4.31 or later
• FTM-300D MAIN: Ver.1.0 or later, SUB: Ver.1.0 or later, DSP: Ver.7.10 or later
• FTM-100D MAIN: Ver.2.40 or later, PANEL: Ver.2.10 or later, DSP: Ver.4.31 or later
⿟ PC
®
• OS：Microsoft Windows
• Processor Clock Frequency：2.0 GHz or faster
• HDD：1 GB or more of available space
• RAM：2 GB or more
• Display resolution：1366 x 768 16-bit high color or higher (32-bit true color is recommended)
• USB port：USB 2.0 (Full Speed)
• LAN port：100BASE-TX/1000BASE-T or Wi-Fi：IEEE 802.11 b or higher
1
• Audio Interfaces*
1
* Sound function is also required when using the "Portable Digital Node Mode" or "Portable HRI Mode".
Furthermore, when communicating in "Direct Operation" in "Portable HRI Mode" using the FT3D or FT2D,
the personal computer must have the "audio input from the microphone terminal pass to the speaker output"
function.
• 3.5 Φ speaker terminal, 3.5 Φ microphone terminal.
HRI Mode".)
*2
In the case of a unique terminal such as a laptop, adapt it to a 3.5 Φ speaker terminal and 3.5 Φ microphone
terminal with a commercially available conversion cable.
• Speaker (It is necessary only when communicating in "Direct Operation" in "Portable HRI Mode".)
⿟ Internet Connection
• ADSL 8 Mbps or faster (No fixed or dynamic global IP address is required.)
When the Internet line speed is low or unstable, the sound may be interrupted or the connection of the WIRES-X
connection may become unstable.
®
8.1 / 10
*2
(It is necessary only for Internet communication in "Portable
6