Using The Portable Hri Mode; Connecting The Transceiver And The Pc; Starting The Wires-X Software; Starting The Transceiver In Special Mode - Yaesu WIRES-X FT3D Instruction Manual

Using the Portable HRI Mode

When communicating via the Internet in "Portable HRI Mode", refer to "Adjusting Audio Level in the Access Point
(Portable HRI Mode)" (page 54) or "Adjusting Audio Level in the Direct Operation (Portable HRI Mode)" (page 56)
and adjust the audio level of the computer.

Connecting the transceiver and the PC

Refer to "Communicating with digital or analog FM mode (Portable HRI Mode)" (page 14) and connect the
transceiver to the PC.

Starting the WIRES-X software

1. Double click the [Wires-X] icon on the desktop of the computer screen.
The main screen of WIRES-X software is displayed.
For details about the main screen, refer to "WIRES-X Software Main Screen" (page 51).

Starting the transceiver in special mode

 FT3D/FT2D
1. Press and hold the [X] key and the [BACK] key simultaneously, while turning the radio ON.
2. Press the [A/B] key to select "Access Point" or "Direct Operation".
The set operation mode is indicated on the frequency display as follows:
Access Point:
Direct Operation: "DIRECT"
To communicate with an analog node station via Direct Operation using the FT2D transceiver, press the [V/M] key
to turn ON the analog voice output (uplink). An " ＊ " will appear on the screen at the right side of the call sign. For
details, refer to "Output of analog audio (uplink) setting" (page 50).
 FTM-400XD/D
1. Press and hold the [DX] key and the [GM] key simultaneously, while turning the radio ON.
2. Press the Band B DIAL knob to select "Access Point" or "Direct Operation".
The set operation mode is indicated on the A Band frequency display as follows:
Access Point:
Direct Operation: "DIRECT"
 FTM-300D
1. Press and hold the [DX] key and the [GM] key simultaneously, while turning the radio ON.
2. Press the [A/B] key to select "Access Point" or "Direct Operation".
The set operation mode is indicated on the A Band frequency display as follows:
Access Point:
Direct Operation: "DIRECT"
 FTM-100D
1. Press and hold the [DX] key and the [GM] key simultaneously, while turning the radio ON.
2. Press the [A/B] (DW) key to select "Access Point" or "Direct Operation".
The set operation mode is indicated on the sub frequency display as follows:
Access Point:
Direct Operation: "DIRECT"
• To return the transceiver to the normal mode, repeat procedure 1 in the above.
• To switch between "Portable Digital Node Mode" and "Portable HRI Mode", return the transceiver to the normal mode
first and then perform the above operation.
The portable station transceiver cannot use the News Station feature or the GM feature.
"WIRES-X NODE" (Frequency Display)
" （ Frequency display） "
" （ Frequency display） "
"NODE"
47