Table of Contents
Advertisement
Adjusting the Battery Percentage
for Limp Mode
1.
Park the machine on a level surface, disengage
the PTO, and move the motion-control levers
outward to the P
ARK
2.
In the M
AIN MENU
press the
button.
Figure 33
3.
In the S
menu, scroll down to L
ERVICE
and adjust the percentage using the – and +
buttons.
Figure 34
position.
, scroll down to S
ERVICE
IMP
After Operation
After Operation Safety
•
Disengage the PTO whenever you are transporting
or not using the machine.
and
•
Use full-width ramps for loading the machine into
a trailer or truck.
•
Tie the machine down securely using straps,
chains, cable, or ropes. Both front and rear straps
should be directed down and outward from the
machine.
•
Replace all worn, damaged, or missing parts and
decals. Keep all fasteners tight to ensure that the
machine is working properly.
g376300
Battery and Charger Safety
M
ODE
General
•
WARNING: Risk of fire and electric shock—The
batteries have no user-serviceable parts.
•
Confirm the voltage that is available in your
country before using the charger.
•
Do not get the charger wet; keep it protected from
rain and snow.
•
A risk of fire, electric shock, or injury may result
from using an accessory not recommended or
g430868
sold by Toro.
•
To reduce risk of a battery explosion, follow these
instructions and the instructions for any equipment
that you intend to use near the charger.
•
Batteries could emit explosive gasses if they are
significantly overcharged.
•
Refer to an Authorized Service Dealer to service
or replace a battery.
Training
•
Never allow children or untrained people to
operate or service the charger. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Read, understand, and follow all instructions on
the charger and in the manual before operating
the charger. Be familiar with the proper use of the
charger.
Preparation
•
Keep bystanders and children away while
charging.
25
Advertisement
Table of Contents
