Table of Contents
Advertisement
Screen
6.
When you complete, exit, or fail calibration, shut
off then start the machine to clear the screen.
Figure 63
Action
Press the
button.
Hold the left motion-control
lever in the full F
ORWARD
position and press the
button.
Hold the left motion-control
lever in the full R
EVERSE
position and press the
button.
Hold the left motion-control
lever in the N
position
EUTRAL
and press the
button.
Hold the right motion-control
lever in the full F
ORWARD
position and press the
button.
Hold the right motion-control
lever in the full R
EVERSE
position and press the
button.
Hold the right motion-control
lever in the N
position
EUTRAL
and press the
button.
Press the
button.
g377652
Adjusting the Tracking
If you push both motion-control levers forward the
same distance and the machine pulls to 1 side, adjust
the tracking as follows.
Note:
The InfoCenter displays only 2 items at a time;
however, the following figures show the full menus
for context.
1.
Park the machine on a level surface, disengage
the PTO, and move the motion-control levers
outward to the P
2.
In the M
AIN MENU
press the
3.
In the S
ERVICE
and press the
4.
Adjust the tracking to the left or right.
Note:
Adjusting the tracking to the left causes
the machine to steer toward the left; adjusting
the tracking to the right causes the machine to
steer toward the right.
5.
Press the
button.
41
position.
ARK
, scroll down to S
ERVICE
button.
Figure 64
menu, scroll down to T
button.
Figure 65
Figure 66
and
g376300
RACKING
g426844
g377650
Advertisement
Table of Contents
